PC1010
Hammer Crusher
PC series hammer crushers reduce medium-hard and brittle feed — coal, cement clinker, gypsum, alum, brick, tile and limestone — up to 300 MPa compressive strength and 15% moisture. A rotor of discs and pinned hammers runs at speed inside the chamber; the hammers strike and grind the rock, the grate below holds oversize until it is small enough to pass, so product size follows the grate rather than a closed side setting. Seven sizes, rotors from 600 × 400 to 1600 × 1800 mm.
60–80t/h capacity
≤200 mmmax feed
132 kWdrive power
Specification
| Type | PC series hammer crusher, pin-hung hammers, grate discharge |
| Rotor diameter × length | 1000 × 1000 mm |
| Rotor speed | 970 r/min |
| Rotor build | Main shaft, discs, pin shafts and hammers |
| Max. feed size | ≤200 mm |
| Output size | ≤15 mm, set by the grate |
| Capacity | 60–80 t/h |
| Motor | 132 kW |
| Machine weight | 6.96 t |
| Feed limits | Compressive strength ≤300 MPa, moisture ≤15% |
| Mounting | Stationary, on a welded steel frame; inspection doors on the housing |
Figures are for reference. Final configuration is confirmed against your feed gradation, required product curve and site layout before the contract is signed.
Model variants
| Model | Rotor Ø × L (mm) | Rotor speed (r/min) | Feed (mm) | Output (mm) | Capacity (t/h) | Motor (kW) | Weight (t) |
|---|---|---|---|---|---|---|---|
| PC0604 | 600 × 400 | 970 | ≤100 | ≤10 | 12–15 | 18.5 | 1.35 |
| PC0806 | 800 × 600 | 970 | ≤100 | ≤10 | 18–24 | 55 | 3.12 |
| PC0808 | 800 × 800 | 970 | ≤120 | ≤15 | 35–45 | 75 | 3.99 |
| PC1010 | 1000 × 1000 | 970 | ≤200 | ≤15 | 60–80 | 132 | 6.96 |
| PC1212 | 1200 × 1200 | 735 | ≤200 | ≤15 | 75–100 | 185 | 11.8 |
| PC1414 | 1400 × 1400 | 750 | ≤250 | ≤20 | 120–170 | 280 | 17.2 |
| PC1618 | 1600 × 1800 | 590 | ≤350 | ≤20 | 228–280 | 500 | 32.4 |
Same machine, different configuration: the model code is set by the figures below. Quote the model code when you enquire — drawings, wearing parts and mounting are shared across the variants listed.
Typical applications
- Coal and coke
- Cement clinker and raw meal
- Gypsum, alum, brick and tile
- Limestone and quarry stone